Opis
AT-FL-93/3 BACK PLUG FOR EGR FLANGE BMW
Professionally made stainless steel replacement for EGR exhaust gas recirculation valve. TIG welded plate and milled flat to ensure perfect adhesion to the intake manifold. It has also been CNC milled to prevent pressure from blowing past the seal.
Benefits of using our EGR replacement:
Turbo spools faster at lower speed,
Elimination of excessive carbon build up caused by damaged EGR
Greater air flow
Thanks to the use of stainless steel, more resistant to mechanical damage
High aesthetics of quality workmanship
BMW
3 (E46)
330 d (M57 D30 (306D1)) 2926ccm 184KM/135kW 1999/10-2005/02
330 d (M57 D30 (306D2)) 2993ccm 204KM/150kW 2003/03-2005/02
330 xd (M57 D30 (306D1)) 2926ccm 184KM/135kW 2000/01-2003/02
330 xd (M57 D30 (306D2)) 2993ccm 204KM/150kW 2002/09-2004/12
3 Touring (E46)
330 d (M57 D30 (306D1)) 2926ccm 184KM/135kW 1999/10-2005/02
330 d (M57 D30 (306D2)) 2993ccm 204KM/150kW 2003/03-2005/02
330 xd (M57 D30 (306D1)) 2926ccm 184KM/135kW 2000/01-2003/03
330 xd (M57 D30 (306D2)) 2993ccm 204KM/150kW 2002/08-2005/05
5 (E39)
525 d (M57 D25 (256D1)) 2497ccm 163KM/120kW 2000/02-2003/06
530 d (M57 D30 (306D1)) 2926ccm 184KM/135kW 1998/08-2000/09
530 d (M57 D30 (306D1)) 2926ccm 193KM/142kW 1998/09-2003/06
5 Touring (E39)
525 d (M57 D25 (256D1)) 2497ccm 163KM/120kW 2000/02-2004/05
530 d (M57 D30 (306D1)) 2926ccm 184KM/135kW 1998/08-2000/09
530 d (M57 D30 (306D1)) 2926ccm 193KM/142kW 2000/09-2004/05
7 (E38)
730 d (M57 D30 (306D1)) 2926ccm 184KM/135kW 1998/08-2000/04
730 d (M57 D30 (306D1)) 2926ccm 193KM/142kW 2000/04-2001/11
THERE ARE OTHER MODELS THAT COULD BE COMPATIBLE WITH THIS PART, YOU MUST CHECK YOURSELF BEFORE PURCZASING
Numery katalogowe:
EGR VALVE : 11717804378
EXHAUST GAS COOLER: 11717787404
Zestaw zawiera:
1 x EGR Valve Replacment
1 x EGR Valve Gasket From VICTOR REINZ
1 x Clamp
1 x Exhuast Manifold Block Off Plate
1 x Exhaust Manifold Block Off Plate Gasket
6 x Mounting Bolts & Washers
1x Aluminum Block off plate for the EGR cooler inlet, allowing you to fully block off the cooler
1x Aluminum Block off plate for the EGR cooler outlet with bleeder valve, allowing for full removasl of EGR cooler
Installation of the replacement in newer models requires reprogramming of the engines ECU. Without removing the valve programmatically, the assembly will cause the „CHECK ENGINE” engine error to appear
